Mobotix M22 - Configuring a MOBOTIX Camera

9.8.2 Configuring a MOBOTIX Camera
General Procedure for Setting up the MOBOTIX Camera:
1) Configure the network parameters.
2) Configure the VoIP settings.
3) Configure the Phone Call-In parameters.
4) Create the required Phone Profiles.
5) Link the phone profile to an event (Messaging).
Configuring the Network Parameters
Set the network parameters (Admin Menu > Ethernet Interface).
•Network:
Activated
• BOOTP/DHCP: Off
• Camera Name: mxcam (freely definable)
• IP Address: 10.1.0.99 (IP address of your MOBOTIX camera)
• Network Mask: 255.0.0.0
• Gateway: 10.0.0.1 (optional)
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com • 10.10.2006
261/288
Software Camera Manual Part 2