5 GENERAL CAMERA CONFIGURATION
5.1 Overview
The general camera configuration will ensure that all required parameters are set
in order to adapt the camera to its operational environment.
Quick Installation
Using the Quick Installation wizard is the easiest and safest way for initially
configuring your MOBOTIX camera. After booting the MOBOTIX camera for the first
time, accessing the administration menu (Admin Menu button) will start the Quick
Installation wizard. This wizard will ask for all required parameters in a step-by-
step manner:
• Language of the user interface
• Activating speaker and microphone
• Camera Name
• Ethernet settings (IP Address, DHCP, Gateway, DNS Server)
• Parameters for ISDN Dial-In/Dial-Out
• Parameters for Phone Call-In/Call-Out
• Parameters for one image transfer to an FTP server
• Routing parameters (these set the "route" that the camera uses when
connecting to the Internet (for e-mail or FTP), e.g. by using a gateway within
the network or direct access via ISDN).
Admin Menu and Setup Menu
The Admin and Setup menus contain links to all administrative dialogs that are
necessary to configure your MOBOTIX camera. These dialogs also allow modifying
the parameters later on that had been set originally using the Quick Installation
wizard.
Note: In order to access the Admin menu, you need to enter a user name of the
admins user group and the corresponding password (default: user name admin,
password meinsm).
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com • 10.10.2006
60/288
Software Camera Manual Part 2
Administration menu:
User name: admin
Password: meinsm
The Quick Installation
wizard has to be com-
pleted at least once
Using the Quick Installation wizard (Admin Menu > Quick Installation)
is recommended especially for inexperienced users when configuring
a camera for the first time or when making changes later on, since the
Quick Installation wizard is checking the configuration data for possible
errors to avoid faulty configuration settings. All settings of the wizard
may also be changed in the Admin or Setup menus, respectively.
Note
X
X
-
-
-
-
X
X
Kamerafunktionen
Kameramodell
To Next Page
Loading...
