Software used:
• Windows XP Professional
• MOBOTIX MxViewer
Camera Settings:
Click on the Fast Mode (30 fps) softbutton of the browser-based user interface to
automatically
execute the following steps:
•Set operating mode to
Frame rate
mode (if present).
• Set maximum Frames per Second to
No limitation
.
• Activate the MxPEG codec.
•Set JPEG quality to
40% (Medium)
.
• Set maximum Exposure time to
Max 1/60
.
•Set Frequency of Power Supply to
60 Hz
.
• Deactivate Night Improvement.
To further enhance camera performance, you should perform these steps
manually
:
•Set Image Size to CIF format (320x240 pixels; Quick Control or Setup Menu).
• Make sure the camera has no other tasks (e.g. FTP transmissions, sending
e–mails, ...).
• Avoid showing logos and displaying text as much as possible.
MxViewer Settings:
• Storage Size: 4 MB
• Minimum Delay
• Full Screen
• Hide Controls
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com • 10.10.2006
58/288
Software Camera Manual Part 2
Note
The Quality Mode softbutton changes the settings to obtain the best
possible image quality.
To Next Page
Loading...
