Profiles & Options
The dialog contains several sample profiles; you can change these profiles or add
new ones by clicking on Add new profile at the bottom of the dialog.
Enter the profile name in the E-Mail Profile n field (where n is the current number
of the profile). Remember to enter a descriptive name as this name is later dis-
played in other dialogs.
• Addressing: Enter the e-mail address of the recipient in the Receiver
Address field; the Sender Address is only required if it is different from the
one specified in the global options. If needed, you can also set the Reply
Address in this section.
• Mail Message: Enter the e-mail Subject and the message text you would
like to send (Note: See the sample AlarmMail profile for information on
how to use variables in the message text).
• E-mail Attachment: Sets the type of data that will be attached to the e-mail:
-
Image from image profile
: Select the
Live or Event image
option or one of
the image profiles (see section 7.8.7,
Image Profiles
) from the Image Pro-
file list.
-
No attachment
: Sends the e-mail without attachment (i.e. only the text).
-
MxPEG or JPEG clip
: Select
MxPEG clip file
to transfer an MxPEG video and
audio clip or
Clip as JPEG file(s)
from the Clip File Type list. Set the remain-
ing parameters as required (clip frame rate as well as the time before
and after the event you would like to include in the clip).
-
Image information (JPEG comment)
: Send the information from the JPEG
comment of the current live image.
-
System Messages
: Sends the messages listed in Admin Menu > System
Messages.
• Server Settings: This section allows setting authentication data, SMTP server
and POP3 server information if they are different from those specified in the
Global Options section at the top of the dialog.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com • 10.10.2006
181/288
Software Camera Manual Part 2
To Next Page
Loading...
