Make sure that a proper DNS server has been set in Admin Menu > Ether-
net Interface.
• Share: Enter the name of the Windows share in this field (e.g.
mxdata
).
• Netbios name: Enter the Windows server's Netbios name in this field (e.g.
winserver
).
• User Name: Enter the name of the local user in this field who has been
granted access to the Windows share. This is the user name used by the
camera when logging onto the Windows computer (e.g.
mxcam
).
• Password: Enter the password of the local user in this field who has been
granted access to the Windows share. This is the password used by the
camera when logging onto the Windows computer (e.g.
mxcam
).
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com • 10.10.2006
221/288
Software Camera Manual Part 2
Caution: Set up the
Windows firewall
Restart the camera to
apply the changes!
Notes
The MOBOTIX cameras use local accounts on the Windows computer.
Domain or Active Directory logins are not supported
..
..
Windows Professional operating systems limit the number of cameras
recording on one PC to a maximum of eight cameras (max. eight si-
multaneous TCP/IP connections). This limitation is not present on Win-
dows Server products.
Windows 95, 98, Millennium and products of the Windows "Home"
family are not supported and must not be used. We recommend
Windows 2000 Professional, Windows XP Professional or higher (or
the corresponding server versions of these operating systems).
Caution
The camera will only start recording on the Windows system if you click
the Set button to apply the settings, Close the dialog, store the con-
figuration and reboot the camera. Likewise, changed settings will only
be applied after the camera has been rebooted.
Procedure!
To Next Page
Loading...
