Configuration
• Profile: The Profile field contains the name of the profile. This name is used
in other dialogs to select the proper phone profile when configuring a Phone
Call-Out action (CL).
• Phone Number or SIP Address: Enter the phone number or SIP address,
which the camera should call in case of an alarm. Set the remaining
parameters as required (Dial Attempts and Dial Timeout). Click on the Add
button to add phone numbers or SIP addresses to this profile.
When executing a phone profile, the camera will call the first number or SIP
address at the top of the list. If the recipient of the call cannot be reached
using the specified number of dial attempts (or if the proper PIN has not
been entered), the camera will try calling the second number or SIP address
of this profile, then the third number, etc.
• Connection type: This parameter sets the connection type of the phone
profile (
SIP
or
ISDN
).
• Message name: The camera will play back this prerecorded voice message
when the recipient accepts the call. The voice message provides an ideal
means for identifying the calling camera (e.g.
"MOBOTIX camera, gate 5;
gate has been opened"
).
• Confirm call with PIN code: Enter a PIN code (Personal Identification
Number), if you would like to prevent unauthorized access to the camera.
Upon accepting the call, the MOBOTIX camera will prompt the recipient to
enter the PIN code on the phone keys. This will only work if the phone
supports touchtones (DTMF tone dialing).
Please note: When using SIP connections, the called phone and the SIP
provider will have to support touchtones, as it is otherwise impossible to
enter the PIN number of the calling MOBOTIX camera. Make sure that the SIP
provider also supports DTMF tone dialing.
• After the message has been sent: Select the audio mode of the camera
after it has established the connection and played back the selected voice
message:
• Hangup after: The camera will drop the connection after it has played back
the voice message. Note that using this option will prevent remote-
controlling the camera. For additional information on this topic, see section
9.6,
Remotely Controlling the Camera Using a Phone
.
• Listen: This option will transmit the sound from the camera microphone to
the called phone. The transmission of audio data from the phone to the
camera is disabled when using this setting.
• Speak: This option allows making an announcement from the phone via
the camera's built-in speaker. The camera will not transmit the sound of
the camera microphone when using this option.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com • 10.10.2006
243/288
Software Camera Manual Part 2
A PIN may only consist of
six digits (0 ... 9).
Make sure that your SIP
provider also supports
DTMF tone dialing when
activating the PIN as you
will not be able to enter
the PIN otherwise!
To Next Page
Loading...
