EasyManua.ls Logo

Mobotix M22 - Page 251

Mobotix M22
292 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 – Control dial-out connection (ISDN)
Pressing the "2" key on the phone and confirming with the # key will prompt
the camera to establish a connection to the Internet using ISDN or to drop an
existing ISDN data connection.
If the connection has been established successfully, the MOBOTIX camera
announces its IP address. You can then access the camera via Internet by
entering this IP address in a browser window. If no data is being transferred,
the camera will drop the connection after the duration set for the Dial-Out
Idle Time parameter. Example:
Announcement of the camera after pressing "2":
2 ... Connect to Internet?
Announcement of the camera after pressing "#":
Please wait …
(The camera announces its IP address.)
Prerequisites for establishing an ISDN dial-out connection:
Properly configured Dial-Out Profile
(Admin Menu > ISDN Data
Connections > Dial-Out Connections
)
ISDN connection set as default route (Admin Menu > Routing)
Dial-out profile specified (Admin Menu > Phone Call-In)
3 - Control camera arming
Pressing the "3" key on the phone and confirming with the # key will prompt
the camera to switch the arming status of the camera (Setup Menu >
General Event Settings). The camera will announce the arming status that
will be valid after pressing the # key. Note that arming can also be controlled
by a Time Table profile as this might interfere with this command. Example:
Announcement of the camera after pressing "3":
3 ... Disable arming?
Announcement of the camera after pressing "#":
OK
4 – Announce the camera's date and time
Pressing the "4" key on the phone and confirming with the # key will prompt
the camera to announce its current date and time. Example:
Announcement of the camera after pressing "4":
4 ... Date and time
Announcement of the camera after pressing "#":
March 14 ... 9:41 am
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com • 10.10.2006
249/288
Software Camera Manual Part 2
Start the ISDN dial-out
connection
Activate/deactivate
camera arming
Announce the camera's
date and time

Table of Contents

Other manuals for Mobotix M22

Related product manuals