• 9 - Switch to Intercom audio mode
Pressing the "9" key on the phone and confirming with the # key will prompt
the camera to activate the Intercom audio mode, allowing you to communi-
cate with the person in front of the camera. While the camera speaker is
active, the camera microphone will be switched off (half duplex).
• Announcement of the camera after pressing "9":
9 ... Intercom
• Announcement of the camera after pressing "#":
OK
• 0 - Switches to the Enhanced Signal Out Options menu
Pressing the "0" key on the phone and confirming with the # key will prompt
the camera to switch to the Signal Output menu. Pressing the appropriate
phone keys will execute the options of the signal output menu.
• Announcement of the camera after pressing "0":
0 ... Signal out menu
• Announcement of the camera after pressing "#":
OK
For more information on this topic, see the
Signal Output
topic in the camera
help and the reference manual.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com • 10.10.2006
251/288
Software Camera Manual Part 2
Activate Intercom audio
mode
Control the camera's
signal output
To Next Page
Loading...
