NEC ASPILA EX - Voipu PCB DHCP Server Mode Setup

Program 84 : Hardware Setup for VoIP
84-04 : VoIPU PCB DHCP Server Mode Setup
998 Programming Aspila EX Software Manual
84-04 : VoIPU PCB DHCP Server Mode Setup
Description
Use Program 84-04 : VoIPU PCB DHCP Server Mode Setup to define whether or not the
DHCP Server on the VoIPU PCB is used.
Input Data
Conditions
None
Feature Cross Reference
• Vo I P
Telephone Programming Instructions
To enter data for Program 84-04 (VoIPU PCB DHCP Server Mode Setup):
1. Enter the programming mode.
2. 84 04
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press MSG once to enter a new item number.
OR
Press MSG until you’ve exited that series’s programming section.
Level:
Aspila EX
IN •Available.
Item Input Data Default Description
DHCP Server Mode 0:Disable
1:Enable
0 Define whether or not the DHCP Server is used.
84-04-01
DHCP Serv.Mode0:Off
back
 ¯ select
84-04-nn
nnnnn
¬ ®