NEC ASPILA EX - Handsfree Answerback;Forced Intercom Ringing

Handsfree Answerback/Forced Intercom Ringing
Aspila EX Software Manual Features 209
Handsfree Answerbac k/Forced Intercom Ringing
Description
Handsfree Answerback permits an extension user (system phone or digital single line) to respond to
a voice-announced Intercom call by speaking toward the phone, without lifting the handset. Like
Handsfree, this is a convenience for workers who don’t have a free hand to pick up the handset.
Conditions
Handsfree Answerback is not available at a analogue single line telephone.
Default Setting
Enabled.
Programming
•20-02-12 : System Options for System Telephones - Forced Intercom Ringing
Enable (1) or disable (0) Forced Intercom Ringing. If disabled (0), Intercom calls voice-
announce.
•20-06-01 : Class of Service for Extensions
Assign a Class Of Service (1-15) to an extension.
•20-08-10 : Class of Service Options (Outgoing Call Service) - Switching from Handsfree
Answerback to Forced Intercom Ringing
In an extension’s Class of Service, enable (1) or disable (0) an extension’s ability to toggle
between Handsfree Answerback and Forced Intercom Ringing for outgoing Intercom calls
(dial 1 or Service Code 812).
•20-09-05 : Class of Service Options (Incoing Call Service) - Setting Handsfree Answerback/
Forced Intercom Ringing
In an extension’s Class of Service, enable (1) or disable (0) an extension’s ability to set
Handsfree Answerback (Service Code 821) and Forced Intercom Ringing (Service Code 823)
for incoming Intercom calls.
Related Features
Handsfree and Monitor
A system phone user can process calls using the speaker and microphone in the telephone
(instead of the handset).
Microphone Cutoff
With Microphone Cutoff enabled, Handsfree Answerback callers to an extension hear a single
beep (instead of two).
Single Line Telephones
Incoming Intercom calls always ring single line telephones.
Aspila EX
• Available