Trunk Group Routing
362 Features Aspila EX Software Manual
Trunk Group Routing
Description
Trunk Group Routing sets outbound call routing options for users that dial the Trunk Group Rout-
ing code (9) for trunk calls. Trunk Group Routing routes calls in the order specified by system pro-
gramming. If a user dials 9 and all trunks in the first group are busy, the system may route the call
to another group.
Conditions
None
Default Setting
Enabled. All trunks are in Group 1.
Programming
•11-01-01 : System Numbering
Set up a Service Code for Alternate Trunk Route Access.
•11-09-01 : Trunk Access Code
If required, change the single-digit Trunk Access Code (normally 9). If you change this code,
you must also review the settings in 11-01 for the new code selected.
•11-09-02 : Trunk Access Code - Alternate Trunk Route Access Code
Assign the Service Code set up in 11-01 for Alternate Trunk Route Access.
•14-05-01 : Trunk Groups
Assign trunks to trunk groups (1-100).
Aspila EX
• Available- 100 trunk groups and 100 routes.
To Next Page
Loading...
