NEC ASPILA EX - Dial Number Preview

Dial Number Preview
Aspila EX Software Manual Features 155
Dial Number Preview
Description
Dialing Number Preview lets a display system phone user dial and review a number before the sys-
tem dials it out. Dialing Number Preview helps the user avoid dialing errors.
Conditions
An extension user cannot edit the displayed number.
Default Setting
Enabled.
Programming
•20-06-01 : Class of Service for Extensions
Assign a Class Of Service (1-15) to an extension.
•20-08-05 : Class of Service Options (Outgoing Call Service) - Dial Number Preview
In an extension’s Class of Service, enable (1) or disable (0) an extension’s ability to use Dial
Number Preview.
Related Features
Central Office Calls, Placing
In order to place an outgoing call, an extension user must have outgoing access to a line, loop
or trunk group key.
Operation
To use Dial Number Preview to place a call (system phone only):
1. Do not lift the handset or press a CALL key.
2. To preview any number, press *.
To preview an Abbreviated Dial number, press DIAL.
3. Dial number you want to call.
The number displays.
4. To dial out the displayed trunk number, press a line/loop/trunk group key.
If the previewed number as a trunk access code (e.g., 9), you can press CALL instead.
OR
To dial out the displayed Intercom number, press a CALL key.
OR
To cancel the number without dialing it out, press HOLD.
Aspila EX
• Available