Program 34 : Tie Line Setup
34-06 : Add / Delete Digit for E&M Tie Line
822 Programming Aspila EX Software Manual
34-06 : Add / Delete Di git for E&M Tie Line
Description
Use Program 34-06 : Add / Delete Digit for E&M Tie Line to set digits that the system should
add or delete for tie lines.
• Delete Digit
Some tie line networks pass the location number and extension number to the remote side.
This program allows the system to ignore such numbers for a call.
If individual extensions do not want to receive an incoming call, you could delete all of the
digits including the extension number.
•Add Digit
If a tie line network requires additional digits to reroute the call to a location, the digits for the
location can be added to the received digits.
Input Data
Conditions
None
Feature Cross Reference
• Tie Lines
Level:
Aspila EX
IN •Available.
Incoming trunk group Number 001-100
Item
No.
Item Input Data Default
01 Delete Digit 0-255 (255 : delete all digits) 0
02 Additional Dial Digits Up to 4 digits No setting
To Next Page
Loading...
