NEC ASPILA EX - Program 16: Department Group Setup; Department Group Basic Data Setup

Program 16 : Department Group Setup
16-01 : Department Group Basic Data Setup
Aspila EX Software Manual Programming 595
Program 16 : Department Group Setup
16-01 : Department Group Basic Data Setup
Description
Use Program 16-01 : Department Group Basic Data Setup to set the function mode for each
department group.
Input Data
Level:
Aspila EX
IN •Available.
Department Group Number 01-64
Item
No.
Item Input Data Default
Related
Program
01 Department Name Max. 12 characters No setting 11-07
02 Department Calling
Cycle
Use this option to set
the call routing for
Department Calling.
Routing can be either
circular (cycles to all
phones in group) or pri-
ority (cycles to highest
priority extensions
first).
0- Priority Routing
1- Circular Routing
016-02
03 Department Routing
When Busy
Use this option to set
how the system routes
an Intercom call to a
busy Department
Group member. Inter-
com callers to the
extension can either
hear busy or route to
the first available
department number.
This only occurs for
calls to the extension
directly, not the depart-
ment number.
0- Normal (Intercom caller to busy department
member hears busy)
1- Circular (Intercom callers to busy department
member routes to idle member)
016-02
04 Hunting Mode 0- A last extension is called and hunting is stopped.
1- Circular
0
05 Extension Group All
Ring Mode Operation
0- Manual
1- Automatic
011-16-10