Program 22 : Incoming Call Setup
22-12 : DID Intercept Ring Group
Aspila EX Software Manual Programming 709
22-12 : DID Inter cept Ring Group
Description
For each DID Translation Table, use Program 22-12 : DID Intercept Ring Group to define the
first destination group for DID calls.
Depending on the entry in Program 22-09 and 22-11, the incoming calls will route to the first desti-
nation group by the following:
• Vacant number intercept (vacant number means that there is no phone connected, no station
card installed, or the extension number is not defined in Program 11-02)
• Busy intercept
• Ring-no-answer intercept
If the destination is '0', the calls will be forwarded to the trunk ring group defined in Program 22-11
based on the table assigned to the DID trunk.
Note: If Program 22-09-05 and 22-09-06 are set, the priority of transferring will be in this order:
Program 22-09-05
+ Program 22-09-06 + Program 22-12
Input Data
Conditions
None
Feature Cross Reference
• Direct Inward Dialing (DID)
Level:
Aspila EX
IN •Available.
Conversion Table Area Number 01-20
Day/Night Mode Incoming Group Number Default
1-8 0 (no setting)
1-100 (incoming group)
101 (DSPDB voice mail)
102 (In-Skin voice mail)
1
To Next Page
Loading...
