Program 11 : System Numbering
11-14 : Service Code Setup (for Hotel)
Aspila EX Software Manual Programming 505
11-14 : Service Code Setup (for Hotel)
Description
Use Program 11-14 : Service Code Setup (for Hotel) to customize the Service Codes which are
used with the Hotel/Motel feature. You can customize additional Service Codes in Programs 11-10
through 11-13, 11-15 and 11-16. The Service Codes can only be used at telephones registered as
hotel terminals in Program 42-02. The following chart shows:
• The number of each code (01-17)
• The function of the Service Code.
• What type of telephones can use the Service Code
• The code’s default entry.
If you change a Service Code, be sure to record your entry in the “New” column.
Input Data
Level:
Aspila EX
IN •Available.
Item
No.
Item Terminals Default
01 Set DND for Own Extension KTS, SLT 727
02 Cancel DND for Own Extension KTS, SLT 728
03 Set DND for Other Extension KTS, SLT 729
04 Cancel DND for Other Extension KTS, SLT 730
05 Set Wake Up Call for Own Extension KTS, SLT 731
06 Cancel Wake Up Call for Own Extension KTS, SLT 732
07 Set Wake Up Call for Other Extension KTS, SLT 733
08 Cancel Wake Up Call for Other Extension KTS, SLT 734
09 Set Room to Room Call Restriction KTS, SLT 735
10 Cancel Room to Room Call Restriction (Hotel) KTS, SLT 736
11 Change Toll Restriction Class for Other Extension KTS, SLT 737
12 Check-In KTS, SLT 738
13 Check-Out KTS, SLT 739
14 Room Status Change for Own Extension KTS, SLT 740