Program 20 : System Option Setup
20-25 : ISDN Options
652 Programming Aspila EX Software Manual
20-25 : ISDN Op tions
Description
Use Program 20-25 : ISDN Options to define the ISDN system options.
Input Data
Level:
Aspila EX
IN •Available.
Item No. Item Input Data Default
01 Send the Release Message After Subscriber
Hangs Up
0 = Service On
1 = Service Off
0
02 Progress Indicate Information Element Detect 0 = Service On
1 = Service Off
0
03 Bearer Capability Select from SLT Outgoing 0 = 3.1KHz
Audio
1 = Speech
0
04 Send DT Until User Dials the First Digit
(Overlap Sending Mode)
With Overlap Sending Mode, if the network
side stops dial tone when CLI is included in the
SETUP message, the system sends dial tone
until the user dials the first digit instead of the
network.
0 = Service On
1 = Service Off
0
05 T305 Timer Start Afteer Sending Disconnect
Message
0 = Service On
1 = Service Off
0
06 Call Proceeding Send Mode 0 = Service On
1 = Service Off
0
07 Busy Tone Mode Set When Disconnect Mes-
sage Received
0 = Busy Tone
from NT (net-
work side)
0
08 Use of Low Layer Compatibility (LLC) 0 = Use
1 = Not Used
0
09 Use of High Layer Compatibility (HLC) Send-
ing
0 = Use
1 = Not Used
0
10 S-Point Terminal Seizes Analogue Trunk 0 = Disable
1 = Enable
0
11 Automatic Changing System Clock When
Date/Time Information Element Received
0 = Disable
1 = Enable
0
12 Incoming Calls Forwarded Out Automatically
Return Connect Message When Outgoing Call
Receives Alerting Message
0 = Disable
1 = Enable
0
To Next Page
Loading...
