Program 81 : Basic Hardware Setup for Trunk
81-01 : COIU Initial Data Setup
946 Programming Aspila EX Software Manual
Program 81 : Basic Hardware Setup for Trunk
81-01 : COIU Initial Data Setup
Description
Use Program 81-01 : COIU Initial Data Setup to define the various basic timers for COIU PCBs.
Input Data
Level:
Aspila EX
MF •Available.
Item
No.
Item Input Data Default
01 Companding method type 0- u-law
1- A-law
0 (u-law)
02 loop current detection time 1-255 (8-2040mS) 75 (600ms)
03 clear signal (open loop) detection time 1-255 (8-2040mS) 90 (720ms)
04 ringing signal detection minimum time 1-255 (8-2040mS) 13 (104ms)
05 single ringing detection minimum time 0-255 (0,8-2040mS) 82 (656ms)
06 double ringing detection minimum off time 0-255 (0,8-2040mS) 13 (104ms)
07 double ringing detection maximum off time 0-255 (0,8-2040mS) 50 (400ms)
08 ringing signal not detection minimum 1-255 (8-2040mS) 88 (704ms)
09 Abandoned Call Detection Timer 1-255 (64-16320mS) 94 (6016ms)
10 continuous ringing minimum time 0-255 (0,8-2040mS) 38 (304ms)
11 continuous ringing maximum time 0-255 (0,8-2040mS) 88 (704ms)
12 ac impedance timer 1-255 (64-16320mS) 4 (256ms)
13 grounding time 1-255 (4-1020mS) 9 (36ms)
14 Flash (Hooking 1)
This sets the flash (Hooking 1) duration for analogue trunk calls. See
Program 14-02-04.
1-255 (16-4080mS) 50 (800ms)
15 Flash (Hooking 2)
This sets the flash (Hooking 2) duration for analogue trunk calls. See
Program 14-02-04.
1-255 (16-4080mS) 156 (2496ms)
16 pause time 1-255 (16-4080mS) 47 (752ms)
17 PFT idle detection time 1-255 (64-16320mS) 47 (3008ms)
18 - Not Used - 1-255 (8-2040mS) 6 (48ms)
19 - Not Used - 1-255 (64-16320mS) 47 (3008ms)
20 loop reverse detect minimum time 1-255 (8-2040mS) 13 (104ms)
21 loop reverse detect maximum time 1-255 (8-2040mS) 107 (856ms)
To Next Page
Loading...
