Program 31 : Trunk Basic Setup
31-04 : External Paging Zone Group
792 Programming Aspila EX Software Manual
31-04 : External Paging Zone Group
Description
Use Program 31-04 : External Paging Zone Group to assign each External Paging zone to an
External Paging group. Users call the External Paging group when broadcasting announcements to
the external zone. When programming, the zones on the PGD adapter are numbers 1-8. The
NTCPU’s zone is number 9.
To simplify programming and troubleshooting, always make the External Paging Zone Group
the same number as the External Paging zone (i.e., 1 = 1, 2 = 2, etc.).
Input Data
Conditions
None
Feature Cross Reference
• Paging, External
Level:
Aspila EX
IN •Available.
External Speaker Number 1-9
Paging Group Number Default
0-8 (0: no setting) Speaker 1 (PGDAD) : 1 (Group 1)
Speaker 2 (PGDAD) : 2 (Group 2)
Speaker 3 (PGDAD) : 3 (Group 3)
Speaker 4 (PGDAD) : 4 (Group 4)
Speaker 5 (PGDAD) : 5 (Group 5)
Speaker 6 (PGDAD) : 6 (Group 6)
Speaker 7 (PGDAD) : 7 (Group 7)
Speaker 8 (PGDAD) : 8 (Group 8)
Speaker 9 (NTCPU) : 1 (Group 1)
To Next Page
Loading...
