Program 90 : Maintenance Program
90-11 : System Alarm Report
Aspila EX Software Manual Programming 1041
90-11 : System Alarm R eport
Description
Use Program 90-11 : System Alarm Report to define the details of the system alarm report.
Input Data
Conditions
None
Level:
Aspila EX
IN •Available.
Item No. Item Input Data Default
01 System Alarm Display Telephone
Assign the display keyset port that should
receive system alarms.
Extension Number
(Up to 8 digits)
No setting
02 Report Method 0- No report
1- Auto-Call to outside
0
03 Destination for Report
Define the Remote Service Center telephone
number. This is the number the system dials
for Automatic Fault Reporting. The number
can be up to 24 digits long, using the charac-
ters 0-9, # and *.
Telephone Number
(Up to 24 digits)
No setting
04 Used a Trunk Group for Report
Define the trunk group used when placing
calls to the Service Center for Automatic
Fault Reporting.
0-100 0
05 Reported Customer ID
Define the site identification data sent to the
Service Center when automatically report-
ing a fault. The data can consist of alphanu-
meric characters up to 16 digits long.
Customer ID
(Up to 16 digits)
No setting
06 SMTP Host Name Up to 255 Characters No setting
07 SMTP Host Port Number 0-65535 25
08 To Address Up to 255 Characters No setting
09 Reply Address Up to 255 Characters No setting
10 From Address Up to 255 Characters No setting
11 DNS Primary Address 0.0.0.0-255.255.255.255 0.0.0.0
12 DNS Secondary Address 0.0.0.0-255.255.255.255 0.0.0.0
13 Customer Name Up to 255 Characteers No setting
To Next Page
Loading...
