NEC ASPILA EX - Ring Cycle Setup

Program 20 : System Option Setup
20-15 : Ring Cycle Setup
636 Programming Aspila EX Software Manual
20-15 : Ring Cycle S etup
Description
Use Program 20-15 : Ring Cycle Setup to define the ringing cycles for each ring type.
Input Data
Level:
Aspila EX
IN •Available.
Item
No.
Incoming Signal Type Ringing Cycle Default
01 Normal incoming call on Trunk 1-13 3
02 PBX,CES incoming call 8
03 Internal incoming call 8
04 DID/DISA 3
05 DID 3
06 Dial-In in the E&M tie line 8
07 Door Box ringing for SLT 2
08 Virtual Extension Ring 8
09 Call-back 4
10 Alarm for SLT 5
11 VRS Waiting Message Incoming Call 6
Number Ringing Cycle
1On
2 On:2.0 / Off:4.0
3 On:1.0 / Off:2.0
4 On:0.5 / Off:0.5
5 On:0.25 / Off:0.25
6 On:0.5 / Off:0.5 / On:0.5 / Off:1.5
7 On:0.25 / Off:0.25 / On:0.25 / Off:5.25
8 On:0.375 / Off:0.25 / On:0.375 / Off:2.0
9 On:0.25 / Off:0.125 / On:0.25 / Off:0.125 / On:0.25 / Off:2.0
10 On:1.0 / Off:4.0