Program 10 : System Configuration Setup
10-25 : H.323 Gateway Prefix Setup
468 Programming Aspila EX Software Manual
10-25 : H.323 Gateway Prefix Setup
Description
Use Program 10-25 : H.323 Gateway Prefix Setup to set the gateway preefix registered to the
outside gatekeeper.
Input Data
Conditions
None
Feature Cross Reference
None
Telephone Programming Instructions
To enter data for Program 10-25 (H.323 Gateway Prefix Setup):
1. Enter the programming mode.
2. 10 25
3. Enter the number of the item you want to program.
4. Select a circuit/resource number to be programmed by pressing the FLASH or the VOLUME
p or VOLUME q keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press MSG once to enter a new item number.
OR
Press MSG until you’ve exited that series’s programming section.
Level:
Aspila EX
IN •Available.
Item
No.
Item Input Data Default
Related
Program
01 Gateway Prefix 0=Disabled, 1=Enabled 0
02 Gateway Prefix 10-24-01
10-25-01
Prefix Reg. 0:Disable
back
¯ select
10-25-nn
nnnnn
¬ -1 +1 ®
To Next Page
Loading...
