Program 30 : DSS/DLS Console Setup
30-03 : DSS Console Key Assignment
774 Programming Aspila EX Software Manual
30-03 : DSS Cons ole Key Assignm ent
Description
Use Program 30-03 : DSS Console Key Assignments to customize the key assignments for
110-Button DSS Consoles. A DSS Console key can have any function up to four digits long (e.g.,
extension number or Service Code).
To prevent lamping problems when reassigning DSS Console keys, it is recommended that you
clear an extension's programmed key before reassigning it (Enter key to be cleared + FLASH key
[If using Web or PC Programming, delete the key assignments and upload the change to the system
before proceeding]). Without clearing an extension's key first, your DSS Console may not show the
correct lamping, although the DSS function will work correctly.
If you are programming the system from the extension to which the DSS Console is connected,
either by phone or using the Web or PC Program, you may need to unplug the DSS and plug it back
in to reset the console's lamping.
Input Data
Index 1
Index 2
Function Number List
[1] General functional level (00 – 99)
Level:
Aspila EX
SA •Available.
DSS Console Number 01-32
Key Number Function number Additional data
01-60 (Model A)
001-200 (Model C)
0-99 (General functional level)
* 00-* 99 (Appearance functional level)
Refer to functional number list
Function
Number
Function Additional Data LED Indication
01 DSS / One-touch Extension number or any
numbers (Up to 24 digits)
Red On: extension busy
Off: extension idle
Rapid Blink Red: DND or Call Forward
02 Microphone Key (ON/
OFF)
Red On: Mic On
Off: Mic Off
03 DND Key Red On: DND
04 BGM (ON/OFF) Red On: BGM ON
Off: BGM OFF
05 Headset Red On: Under headset operation
06 Transfer Key None
To Next Page
Loading...
