Program 90 : Maintenance Program
90-06 : Trunk Control
1032 Programming Aspila EX Software Manual
90-06 : Trunk Cont rol
Description
Use Program 90-06 : Trunk Control is used for the trunk maintenance. Busy Out lets you block a
PCB from placing outgoing calls (just like placing the PCB switch down). Once busied out, none of
the ports on the PCB can be used for new calls. Existing calls, however, are not torn down.
Input Data
Conditions
None
Feature Cross Reference
None
Level:
Aspila EX
SA •Available.
Menu Number 0- Set Busy Out
1- Reset/Release Busy Out
Trunk Port Number
1-200
To Next Page
Loading...
