NEC ASPILA EX - Dial Block Release

Program 90 : Maintenance Program
90-19 : Dial Block Release
Aspila EX Software Manual Programming 1051
90-19 : Dial Block Release
Description
When the extension number is entered in Program 90-19 : Dial Block Release, the extension will
be released from the Dial Block restriction.
Input Data
Conditions
None
Feature Cross Reference
• Toll Restriction
Telephone Programming Instructions
To enter data for Program 90-19 (Dial Block Release):
1. Enter the programming mode.
2. 90 19
3. Enter the number of the item you want to program.
4. Select the telephone number to be programmed by pressing the FLASH or the VOLUME
p
or VOLUME q keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press MSG once to enter a new item number.
OR
Press MSG until you’ve exited that series’s programming section.
Level:
Aspila EX
SA •Available.
Extension Number Up to 8 digits
Input Data
[Release?] : Dial 1 and press TRFR
(Press only TRFR key for cancel)
90-19-01 TEL301
CLR Dial Block
back
 ¯ select
90-19-nn TELnnn
nnnnn
¬ ®