NEC ASPILA EX - Gain Table for ARS;F-Route Access

Program 44 : ARS/F-Route Setup
44-07 : Gain Table for ARS/F-Route Access
918 Programming Aspila EX Software Manual
44-07 : Gain Table for ARS/F-Route Acces s
Description
Use Program 44-07 : Gain Table for ARS/F-Route Access to set the PAD table. If an extension
dials ARS/F-Route number;
• The Extension Dial Gain Table is activated, which is assigned in Program 44-05.
• The Extension Dial Gain Table follows “Outgoing transmit” and “Outgoing receive” settings.
If the incoming call is transferred to another line using ARS/F-Route;
• The Tandem Gain Table is activated, which is assigned in Program 44-05.
• The Tandem Gain Table follows the “Incoming transmit” and “Incoming receive” settings for
incoming line, and “Outgoing transmit” and “Outgoing receive” settings for the outgoing line.
Note: For the ARS/F-Route call (in the above case), CODEC gain in Program 14-01-02 and
14-01-03 are not activated.
Input Data
Conditions
None
Feature Cross Reference
• Automatic Route Selection (ARS)/F-Route
Level:
Aspila EX
IN •Available.
Gain Table Number 1-500
Item No. Item Input Data Default
01 Incoming Transmit 1-63
(-15.5 …+15.5dB)
32
02 Incoming Receive 1-63
(-15.5 …+15.5dB)
32
03 Outgoing Transmit 1-63
(-15.5 …+15.5dB)
32
04 Outgoing Receive 1-63
(-15.5 …+15.5dB)
32