NEC ASPILA EX - SMDR Output Options

Program 35 : SMDR and Account Code Setup
35-02 : SMDR Output Options
Aspila EX Software Manual Programming 833
35-02 : SMDR Ou tput Options
Description
Use Program 35-02 : SMDR Output Options to set the SMDR (Station Message Detail Record-
ing) output options for each of the 8 SMDR ports. Refer to the following chart for a description of
each option, its range and default setting.
Input Data
Level:
Aspila EX
IN •Available.
SMDR Port Number 1-8
Item
No.
Item Input Data Default
01 Toll Restricted Call
SMDR can include or exclude calls blocked
by Toll Restriction.
0=Not Displayed
1=Displayed
1
02 PBX Calls
When the system is behind a PBX, SMDR can
include all calls or just calls dialed using the
PBX trunk access code.
0=Not Displayed
1=Displayed
1
03 Trunk Number or Name
Select whether the system should display the
trunk name (0) or the number (1) on SMDR
reports. If this option is set to “1”, Program
35-02-14 must be set to “0”.
0=Name
1=Number
1
04 Summary (Daily)
Set this option to (1) to have the SMDR report
provide a daily summary (at midnight every
night).
0=Not Displayed
1=Displayed
1
05 Summary (Weekly)
Set this option to (1) to have the SMDR report
provide a weekly summary (every Saturday at
midnight).
0=Not Displayed
1=Displayed
1
06 Summary (Monthly)
Set this option to (1) to have the SMDR report
provide a monthly summary (at midnight on
the last day of the month).
0=Not Displayed
1=Displayed
1
07 Toll Charge Cost
Set this option to (1) have the SMDR report
include toll charges.
0=Not Displayed
1=Displayed
1