NEC ASPILA EX - Client Information Setup

Program 10 : System Configuration Setup
10-15 : Client Information Setup
Aspila EX Software Manual Programming 447
10-15 : Client Info rmation Setup
Description
Use Program 10-15 : Client Information Setup to set up the client information when the DHCP
server needs to assign a fixed IP address to clients.
Input Data
Level:
Aspila EX
SA •Available.
Item Input Data Default Description
Client 1 MAC: 00-00-00-00-00-00
FF-FF-FF-FF-FF-FF
00-00-00-00-00-00 The IP address should be assigned
out of the scope range set up in
Program 10-14.
IP address
1.0.0.1126.255.255.254
128.1.0.1191.254.255.254
192.0.1.1223.255.254.254
0.0.0.0
Client 2 MAC: 00-00-00-00-00-00
FF-FF-FF-FF-FF-FF
00-00-00-00-00-00
IP address
1.0.0.1126.255.255.254
128.1.0.1191.254.255.254
192.0.1.1223.255.254.254
0.0.0.0
Client 3 MAC: 00-00-00-00-00-00
FF-FF-FF-FF-FF-FF
00-00-00-00-00-00
IP address
1.0.0.1126.255.255.254
128.1.0.1191.254.255.254
192.0.1.1223.255.254.254
0.0.0.0
Client 4 MAC: 00-00-00-00-00-00
FF-FF-FF-FF-FF-FF
00-00-00-00-00-00
IP address
1.0.0.1126.255.255.254
128.1.0.1191.254.255.254
192.0.1.1223.255.254.254
0.0.0.0