NEC ASPILA EX - Pre-Ringing Setup

Program 10 : System Configuration Setup
10-08 : Pre-Ringing Setup
436 Programming Aspila EX Software Manual
10-08 : Pre-Ring ing Setup
Description
Use Program 10-08 : Pre-Ringing Setup to enable or disable pre-ringing for trunk calls. This sets
how a trunk initially rings a telephone. With pre-ringing, a burst of ringing occurs as soon as the
trunk’s LED flashes. The call then continues ringing with the normal ring cadence cycle. Without
pre-ringing, the call starts ringing only when the normal ring cadence cycle occurs. This may cause
a ring delay, depending on when call detection occurs in reference to the ring cycle.
Input Data
Conditions
None
Feature Cross Reference
• Central Office Calls, Answering
Level:
Aspila EX
IN •Available.
Input Data Default
0: disable
1: enable
1