Program 20 : System Option Setup
20-14 : Class of Service Options for DISA/E&M
634 Programming Aspila EX Software Manual
20-14 : Class of Serv ice Options for DI SA/E&M
Description
Use Program 20-14 : Class of Service Options for DISA/E&M to enable/disable DISA and tie
line Class of Service options. You assign a DISA Class of Service to DISA users in Program 25-09.
Assign tie line Classes of Service in 34-02. Up to 15 DISA/E&M Classes of Service can be defined.
Note: Analogue trunk-to-analogue trunk and ISDN trunk-to-ISDN trunk calls are supported by
this program. However, analogue trunk-to-ISDN trunk and ISDN trunk-to-analogue trunk
calls are NOT supported by this program.
Input Data
Level:
Aspila EX
IN •Available.
Class of Service Number 01-15
Item
No.
Item
Input
Data
Default
COS 01-14 COS 15
01 First Digit Absorption
For tie lines, enable or disable the ability to absorb (ignore) the first
incoming digit. Use this to make the tie trunk compatible with 3- and
4-digit tie line service. This option does not apply to DISA.
0-Off
1-On
00
02 Trunk Group Routing/ARS Access
This option enables or disables a DISA or tie trunk caller’s ability to
dial 9 for Trunk Group Routing or Automatic Route Selection (ARS).
0-Off
1-On
00
03 Trunk Group Access
This option enables or disables a DISA or tie trunk caller’s ability to
access trunk groups for outside calls (Service Code 814).
0-Off
1-On
00
04 Common Abbreviated Dialing
This option enables or disables a DISA or tie trunk caller’s ability to
use the system’s Common Abbreviated Dialing.
0-Off
1-On
00
05 Operator Calling
This option enables or disables a DISA or tie trunk caller’s ability to
dial 0 for the telephone system operator.
0-Off
1-On
00
06 Internal Paging
This option enables or disables a DISA or tie trunk caller’s ability to
use the telephone system’s Internal Paging.
0-Off
1-On
00
07 External Paging
This option enables or disables a DISA or tie trunk caller’s ability to
use the telephone system’s External Paging.
0-Off
1-On
00
08 Direct Trunk Access
This option enables or disables a DISA or tie trunk caller’s ability to
use Direct Trunk Access (Service Code 815).
0-Off
1-On
00
To Next Page
Loading...
