Program 20 : System Option Setup
20-17 : Operator’s Extension
Aspila EX Software Manual Programming 641
20-17 : Operator ’s Extensio n
Description
Use Program 20-17 : Operator’s Extension to designate an operator. When an extension user dials
“0” or “9” (defined by Program 11-01 Type 5), calls go to the operator selected in this program.
If you don’t assign an extension in Program 90-11-01, system alarms appear on the extension
assigned in this option.
Input Data
Conditions
None
Feature Cross Reference
• Intercom
Level:
Aspila EX
IN •Available.
Operator Number 1-8
Item
No.
Item Input Data Default
Related
Program
01 Operator’s Extension
Number
Up to 8 digits No setting 11-01
02 Operator Console 0- Normal key set
1- Special Operator Console
0
To Next Page
Loading...
