Program 44 : ARS/F-Route Setup
44-06 : Additional Dial Table
Aspila EX Software Manual Programming 917
44-06 : Addition al Dial Table
Description
Use Program 44-06 : Additional Dial Table to set the additional dial table to add prior to the
dialed ARS/F-Route number.
Input Data
Conditions
None
Feature Cross Reference
• Automatic Route Selection (ARS)/F-Route
Telephone Programming Instructions
To enter data for Program 44-06 (Additional Dial Table):
1. Enter the programming mode.
2. 44 06
3. Enter the number of the item you want to program.
4. Select the Additional Dial Table number to be programmed by pressing the FLASH or the
VOLUME
p or VOLUME q keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press MSG once to enter a new item number.
OR
Press MSG until you’ve exited that series’s programming section.
Level:
Aspila EX
IN •Available.
Additional Dial Table Number 1-1000
Additional Dial Default
Up to 24 digits (1-9, 0, *, #, Pause) No setting
4-06-01 Add TBL1
Dial =
back
¯ select
44-06-nn Add TBLnnnn
nnnnn
¬ ®
To Next Page
Loading...
