NEC ASPILA EX - Trunk Access Map Setup

Program 14 : Trunk Basic Setup
14-07 : Trunk Access Map Setup
552 Programming Aspila EX Software Manual
14-07 : Trunk Acce ss Map Setup
Description
Use Program 14-07 : Trunk Access Map Setup to set up the Trunk Access Maps. This sets an
extension’s access options for trunks. For example, an extension can only place outgoing calls on
trunks to which it has outgoing access. There are 200 Access Maps with all 200 trunk ports pro-
grammed in Map 1 with full access.
An extension can use one of the maps you set up in this program. Use Program 15-06 to assign
Trunk Access Maps to extensions. Each trunk can have one of eight access options for each Access
Map.
Input Data
Default
• Access Map 1 = Trunk Ports 1-200 assigned with option ‘7’ access (incoming and outgoing
access and access when trunk is on Hold).
• Access Maps 2-200 - Trunk Ports 1-200 assigned with option ‘0’ access (no access).
Conditions
None
Feature Cross Reference
• Central Office Calls, Answering
• Central Office Calls, Placing
Level:
Aspila EX
IN •Available.
Access Map Number 1-200
Trunk Port Number Input Data
001-200 0- No access
1- Outgoing access only
2- Incoming access only
3- Access only when trunk on Hold
4- Outgoing access and access when trunk on Hold
5- Incoming access and access when trunk on Hold
6- Incoming and Outgoing access
7- Incoming access, outgoing access and access when trunk on Hold