NEC ASPILA EX - Trunk Group Routing for DISA

Program 25 : DID/DISA Setup
25-10 : Trunk Group Routing for DISA
Aspila EX Software Manual Programming 755
25-10 : Trunk Group Routing for DISA
Description
Use Program 25-10 : Trunk Group Routing for DISA to assign the Trunk Group route chosen
when a user places a DISA call into the system and dials 9. Set Trunk Group Routing in Program
14-06. Enable or disable the DISA caller’s ability to dial 9 in Program 20-14-02. You assign a route
to each DISA Class of Service (1-15). The system assigns a DISA Class of Service to a call based
on the password the DISA caller dials.
When programming, you make a separate entry for each Night Service Mode.
Input Data
Conditions
None
Feature Cross Reference
• Direct Inward System Access (DISA)
Level:
Aspila EX
IN •Available.
DISA User Number 1-15
Day/Night Mode Route Table Number Default
1-8 0-100
(0- no setting)
1