Program 25 : DID/DISA Setup
25-07 : System Timers for DID/DISA
750 Programming Aspila EX Software Manual
25-07 : System Ti mers for DID/DISA
Description
Use Program 25-07 : System Timers for DID/DISA to set the value for the system timers which
affect DID and DISA. Refer to the following chart for a description of each option, its range and
default setting.
Input Data
Level:
Aspila EX
IN •Available.
Item
No.
Item Input Data Default
Related
Program
01 DISA Dial Tone Time
After answering a DISA trunk, the system waits this
interval for the caller to dial the first digit of the DISA
password. If the caller fails to dial within this interval,
the system drops the call.
0-64800 10 25-04
02 DID/DISA No Answer Time
A DISA caller can ring an extension for this interval
before the system sets the call as a Ring No Answer.
After this interval expires, the call follows the pro-
grammed Ring No Answer routing (set in Program
25-03 and 25-04).
0-64800 30 25-04
03 Disconnect after DID/DISA re-transfer to IRG 0-64800 60
04 Calling Time to Automatic answering Telephone set 0-64800 10
05 Duration time for Guidance Message by Automatic
answering telephone set
0-64800 10
06 Duration time for Guidance Message by ACI Talkie 0-64800 10
07 DISA Conversation Warning Tone Time
Determine the length of time a DISA caller can talk
before the Long Conversation tone is heard.
0-64800 180
08 DISA Long Conversation Disconnect
This timer determines how long the system will wait
before disconnecting a call after the Long Conversa-
tion tone is heard.
0-64800 10
09 DISA Internal Paging Time
This is the maximum length of an Internal Page
placed by a DISA caller. If the Page continues longer
than this interval, the system terminates the DISA
call.
0-64800 30
To Next Page
Loading...
