NEC ASPILA EX - Page 757

Program 25 : DID/DISA Setup
25-07 : System Timers for DID/DISA
Aspila EX Software Manual Programming 751
Conditions
None
Feature Cross Reference
• Direct Inward System Access (DISA)
Telephone Programming Instructions
To enter data for Program 25-07 (System Timers for DID/DISA):
1. Enter the programming mode.
2. 25 07
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press MSG once to enter a new item number.
OR
Press MSG until you’ve exited that series’s programming section.
10 DISA External Paging Time
This is the maximum length of an External Page
placed by a DISA caller. If the Page continues longer
than this interval, the system terminates the DISA
call.
0-64800 30
11 DID/DISA Answer Delay Timer 0-64800 0
13 DID/DISA Busy Tone Interval
If a DISA caller dials a busy extension (and Program
25-04 = 0), the system plays busy tone for this inter-
val before disconnecting.
0-64800 5
14 Delayed DID Answer Timer 0-64800 10
25-07-01
DISA_Dial_Tone10 Sec.
back
 ¯ select
25-07-nn
nnnnn
¬ ®
Item
No.
Item Input Data Default
Related
Program