Program 11 : System Numbering
11-12 : Service Code Setup (for Service Access)
Aspila EX Software Manual Programming 499
11-12 : Service Code Setup (for Service Access )
Description
Use Program 11-12 : Service Code Setup (for Service Access) to customize the Service Codes
which are used for service access. You can customize additional Service Codes in Programs 11-10,
11-11, and 11-13 through 11-16. The following chart shows:
• The number of each code (01-48)
• The function of the Service Code.
• What type of telephones can use the Service Code
• The code’s default entry. For example, dialing 805 (code 05) will cancel a previously set
Camp-On.
• Programs that may be affected with the changing the code.
If you change a Service Code, be sure to record your entry in the “New” column.
Input Data
Level:
Aspila EX
IN •Available.
Item
No.
Item Terminals Default New
Related
Program
01 Call Forwarding / Do Not Disturb Override
Activating Call Forwarding/Do Not Disturb Override.
This code is only available if you disable the voice
mail Single Digit dialing code in Program 11-16-09.
KTS, SLT 807 11-16-09
02 Conference KTS, SLT 826
03 Override (Off-Hook Signaling) KTS, SLT 809
04 Set Camp-On KTS, SLT 850
05 Cancel Camp-On KTS, SLT 870
06 Switching of Voice Call and Signal Call KTS, SLT 812
07 Step Call KTS, SLT 808
08 Barge-In KTS, SLT 810
09 Change to STG All Ring KTS, SLT 780 16-02
10 Common/Extension Abbreviated Dialing KTS, SLT 813
11 Group Abbreviated Dialing KTS, SLT 814
12 Last Number Dial KTS, SLT 816
13 Saved Number Dial KTS, SLT 815
14 Trunk Group Access KTS, SLT 804
15 Specified Trunk Access KTS, SLT 805
To Next Page
Loading...
