Program 26 : ARS Service
26-01 : Automatic Route Selection Service
Aspila EX Software Manual Programming 763
Program 26 : ARS Service
26-01 : Automat ic Route Selec tion Service
Description
Use Program 26-01 : Automatic Route Selection Service to define the system options for Auto-
matic Route Selection (ARS).
Input Data
Conditions
None
Feature Cross Reference
l Automatic Route Selection
Level:
Aspila EX
IN •Available.
Item No. Item Input Data Default
01 ARS Service
Enable or disable ARS.
0 = Disable 0
02 Network Outgoing Inter-Digit ARS
Timer
With Networking, this timer replaces
20-03-04 when determining if all network
protocol digits have been received. If ARS is
enabled at Site B, this timer can be pro-
grammed for 5 (500 msec) at Site A. If ARS
is disabled and Site B is using F-Route for
outbound dialing, this timer should be pro-
grammed for 30 (3 seconds) at Site A.
0-64800 (msec.) 30
03 ARS Misdialed Number Handling
If a user dials a number not programmed in
ARS, this option determines if the system
should route over turnk group 1 or play error
tone.
0 = Route to Trunk
Group 1
1 = Play Warning
Tone to Dialer
1
To Next Page
Loading...
