Headset Operation
Aspila EX Software Manual Features 211
Headset O peration
Description
A system phone user can utilize a customer-provided headset in place of the handset. Like using
Handsfree, using the headset frees up the user’s hands for other work. However, Headset Opera-
tion provides privacy not available from Handsfree.
An extension in the headset mode has two options for when it appears busy to incoming callers.
The headset extension can be:
• Busy to incoming callers when only one extension appearance is busy (i.e., Off-Hook Signal-
ing prevented)
OR
• Busy to incoming callers only when both extension appearances are busy (i.e., Off Hook Sig-
naling allowed)
As the headset plugs into a separate jack on the bottom of the phone, the handset can still be con-
nected to the phone. This provides you with the option to use the handset, headset or the speaker-
phone for calls.
Conditions
(A.) While in the headset mode, the Headset function key becomes a release (disconnect) key and
no dial tone is heard from the speaker.
(B.) While in the headset mode, the hook switch is not functional.
Default Setting
Disabled.
Programming
•15-07-01 : Programming Function Keys
Assign a function key for Headset operation (code 05).
•20-02-05 : System Options for System Telephones - Headset Busy Mode
Set the conditions under which a headset extension is busy to incoming callers:
• The Headset extension is busy to incoming callers when only one extension appearance is
busy (0).
OR
• Headset extension is busy to incoming callers only when both extension appearances are busy
(1).
•20-02-12 : System Options for System Telephones - Forced Intercom Ringing
Determine whether intercom calls should ring or voice-announce extensions (0=voice,
1=ring).
•41-14-04 : ACD Options - Automatic Answer in Headset Mode
With ACD, enable (1) or disable (0) a user’s ability to automatically answer calls as they ring
in while in headset mode.
Aspila EX
• Available
To Next Page
Loading...
