Time and Date
Aspila EX Software Manual Features 347
Time and Date
Description
The system uses Time and Date for:
Conditions
The system retains the Time and Date after a power failure or system reset.
Default Setting
Enabled.
Programming
•10-01-01 : Time and Date
Set the system Time and Date from your administrator’s telephone.
•20-02-07 : System Options for System Telephones - Time and Date Display Mode
Select the display mode (type 1-8) for Time and Date (i.e., Time and Date format).
•20-06-01 : Class of Service for Extensions
Assign a Class Of Service (1-15) to an extension.
•20-07-03 : Class of Service Options (Administrator Level) - Time and Date
In an extension’s Class of Service, enable (1) or disable (0) the extension’s ability to set the
Time and Date.
Aspila EX
• Available
• Central Office Calls (Access Maps) • Ring Groups
• Class of Service (Class) • Station Message Detail Recording
• Direct Inward Lines • System Reports
• Display Telephones • Toll Restriction (Class)
• Fax Machine Compatibility • Trunk Group Routing
• Night Service (Automatic) • Voice Response System
• Programmable Trunk Parameters
To Next Page
Loading...
