Program 20 : System Option Setup
20-09 : Class of Service Options (Incoming Call Service)
Aspila EX Software Manual Programming 621
20-09 : Class of Serv ice Options (Inc oming Call Serv ice)
Description
Use Program 20-09 : Class of Service Options (Incoming Call Service) to define the incoming
call feature availability for each extension’s Class of Service.
Input Data
Conditions
None
Feature Cross Reference
• Class of Service
Level:
Aspila EX
IN •Available.
Class of Service Number 01-15
Item
No.
Item
Input
data
Default
Related
Program
COS
01-14
COS 15
01 Second Call for DID/ DISA/ DIL/ E&M
Enables/disables the extension’s ability to receive a sec-
ond call from a DID, DISA, DIL, or tie line caller.
Note: With this option set to ‘1’, the destination extension
must be busy in order for a second DNIS caller to ring
through. If the destination extension does not have a line or
loop key available for the second call and a previous call is
ringing the extension but has not yet been answered, the sec-
ond caller will hear busy regardless of this program’s setting.
0-Off
1-On
00
02 Caller ID Display
Enables/disables the Caller ID display at an extension.
0-Off
1-On
10
03 Sub Address Identification 0-Off
1-On
10
04 Notification for Incoming Call List existence 0-Off
1-On
10
05 Setting Handsfree Answerback or Forced Intercom
Ringing
Allows/prevents an extension from enabling Handsfree
Answerback or Forced Intercom Ringing for their incom-
ing Intercom calls
0-Off
1-On
1011-11-15,
11-11-16
To Next Page
Loading...
