Program 26 : ARS Service
26-02 : Dial Analysis Table for ARS
Aspila EX Software Manual Programming 765
26-02 : Dial Analy sis Table for ARS
Description
Use Program 26-02 : Dial Analysis Table for ARS to set pre-transaction tables for selecting
Automatic Route Selection (ARS).
• Service Type 1 (Route to Trunk Group Number) - the number routes to a trunk group.
• Service Type 2 (F-Route Selected) - The number is controlled by the F-Route table.
Input Data
Level:
Aspila EX
IN •Available.
Dial Analysis Table Number 1-200
Item No. Item Input Data Default
01 Dial Dial Digits (16 dig-
its maximum)
No Setting
02 Service Type 0 = No ARS
1 = Route to Trunk
Group
2 = Select F-Route
Access
0
03 Service Number In Service Type 1:
Select Trunk
Group Number
(0-100, 0=no
route)
In Service Type 2:
F-Route Time
Schedule Not Used
= 0-500 (F-Route
Table Number).
Refer to Program
44-05.
F-Route Tie
Schedule Used =
0-500 (F-Route
Selection Num-
ber). Refer to Pro-
gram 44-04.
0
04 ARS Class of Service 0-16 10
05 Dial Treatment 0-15 0
To Next Page
Loading...
