Program 45 : Voice Mail Integration
45-01 : Voice Mail Integration Options
Aspila EX Software Manual Programming 925
Program 45 : Voice Mail Integration
45-01 : Voice Mail Integr ation Options
Description
Use Program 45-01 :Voice Mail Integration Options to customize certain voice mail integration
options.
Input Data
Level:
Aspila EX
IN •Available.
Item No. Item Input Data Default
01 Voice Mail Department Group Number
Assign which Extension (Department)
Group number is to be assigned as the
voice mail group.
0 - 64 (0=no voice mail) 0
02 Voice Mail Master Name
Enter the Voice Mail master name.
Up to 12 Characters Voice Mail
03 Voice Mail Screening
Enable/disable the system’s ability to pro-
cess the Call Screening commands (1 +
extension number) sent from the Voice
Mail. You should normally enable this
option to allow for Voice Mail Call
Screening. Disable this option if your sys-
tem has been modified so that extensions
begin with the digit 1 (e.g., 101, 102, etc.).
Also see the Flexible System Numbering
feature.
0 = Off
1 = On
1
04 Park and Page
Enable/disable the system’s ability to pro-
cess the Voice Mail’s Park and Page (*)
commands. You should normally enable
this option.
0 = Off
1 = On
1
05 Message Wait
Enable/disable the system’s ability to pro-
cess the Voice Mail’s Message Wait (#)
commands. You should normally enable
this option. If enabled, be sure that the
programmed Message Notification strings
don’t contain the code 805 for trunk
access.
0 = Off
1 = On
1
06 Record Alert Tone Interval Time
This timer sets the interval between voice
Mail Conversation Record alerts
0-64800 seconds 0