NEC ASPILA EX - Program 35: SMDR and Account Code Setup; SMDR Options

Program 35 : SMDR and Account Code Setup
35-01 : SMDR Options
Aspila EX Software Manual Programming 831
Program 35 : SMDR and Account Co de Setup
35-01 : SMDR Op tions
Description
Use Program 35-01 : SMDR Options to set the SMDR (Station Message Detail Recording)
options for each of the 8 SMDR ports. Refer to the following chart for a description of each option,
its range and default setting.
Input Data
Conditions
None
Level:
Aspila EX
IN •Available.
SMDR Port Number 1-8
Item
No.
Item Input Data Default
01 Output Port Type
This option specifies the type of connection
used for SMDR. The baud rate for the COM
port should be set in Program 10-21-02.
0- No setting
1- COM(NTCPU)
2- USB (NTCPU)
3- -- Reserve –
4- CTA/CTU
0
02 Output Destination Number
This option specifies the SMDR printer output
port (CTA/CTU port number).
Up to 8 digit No setting
03 Header Language
Specify the language in which the SMDR
header should be printed.
English
German
French
Italian
Spanish
0
04 Omit Digits
The number of digits entered in this option do
not print on the SMDR report. For example, if
the entry is 10, the first 10 digits a user dials do
not appear on the SMDR report.
0-24 (0: Not applied) 0
05 Min. Digits
Outgoing calls must be at least this number of
digits for inclusion in the SMDR report.
0-24 (0: Not applied) 0
06 Min. Call Duration
The duration of a call must be at least this
interval to be included on the SMDR report.
0-65535 seconds
(0: All)
0
07 Min. Ring Time
A call must ring for at least this interval to be
included on the SMDR report.
0-65535 seconds
(0: All)
0