NEC ASPILA EX - Single Line Telephone Basic Data Setup

Program 15 : Extension Basic Setup
15-03 : Single Line Telephone Basic Data Setup
566 Programming Aspila EX Software Manual
15-03 : Single Line Telephone Basic Data Setup
Description
Use Program 15-03 : Single Line Telephone Basic Data Setup to set up various single line tele-
phone options.
Input Data
Level:
Aspila EX
IN •Available.
Extension Number Max. 8 digits
Item
No.
Item Input Data Default
Related
Program
01 SLT Signaling Type
Use this option to tell the system the type of
dialing the connected telephone uses.
0- DP
1- DTMF
0
02 Loop current (Not Used) 0- 20mA
1- 35mA
0
03 Terminal Type
Enter 1 for this option to allow a single line port
to receive DTMF tones after the initial call
setup. Enter 0 to have the port ignore DTMF
tones after the initial call setup. For Voice Mail,
always enter 1 (e.g., receive DTMF tones).
0- Normal
1- Special
0
04 Flashing
Enables/disables Flash for single line (500/2500
type) telephones.
0- Disable
1- Enable
1
05 External Reverse 0- Disable
1- Enable
0
06 Extension Reverse 0- Disable
1- Enable
0
07 Enabled on hook when holding (SLT) 0- Disable
1- Enable
1
08 Answer on hook when holding (SLT) 0- Disable
1- Enable
111-12-46
09 Extension Number Display 0- Disable
1- Enable
0