Single Line Telephones - Digital
Aspila EX Software Manual Features 329
Single Line Telephon es - Digital
Description
The digital single line telephone (DSL) can be installed as On-Premise extensions. Digital single
line telephone users can dial codes to access the features available to system phone users. They also
have two Function Keys that can be programmed the same as for a system phone.
The DSL has a CALL1 and CALL2 key to allow multiple call handling.
The telephone has an integral wall mount bracket supplied.
Each digital single line telephone installed must have a port on an ESIU PCB.
Conditions
• The digital single line telephone does not have a CONF or MSG key that is found on all other
system phones. For these features the user must dial the equivalent service code (Conference
is HOLD+826 and Message Waiting is 841).
• The digital single line telephone can not have any modules installed.
• The digital single line telephone does not have a seperate socket for headset connection.
• The digital single line telephone does not have any One Touch keys.
Default Setting
• Digital Single Line Telephones function after they are installed and properly programmed.
Programming
•10-03-03 : PCB Setup, For ESIU Unit - Type
10-03-01 : PCB Setup, For ESIU Unit - Type = 1 (TEL)
The type is assigned automatically when the DSL is connected for the first time extensions.
•20-06-01 : Class of Service for Extensions
Assign a Class Of Service (1-15) to extensions.
Aspila EX
• Available- 256 Digital Single Line telephones maximum
To Next Page
Loading...
