Single Line Telephones, Analogue Sets
328 Features Aspila EX Software Manual
If required, modify the criteria for dial tone detection and call progress tone detection for the
DTMF tones received at a single line telephone.
•82-04-01 : SLIU Initial Data Setup
Set various timing parameters for the analogue station PCBs. The entries you make in this
program affect all SLIU PCBs installed.
Related Features
Single line telephone users have access to the following features:
Data Communications
APA and APR modules can be used with system phones to provide an analogue port.
Refer to the individual features for additional descriptive, programming and operational information.
Operation
Refer to the individual features listed in the Related Features chart above.
Abbreviated Dialing Department Step Calling Message Waiting
Account Codes Directed Call Pickup Night Service
Alarm Do Not Disturb Off Hook Signaling
Automatic Route Selection Door Box Paging
Barge In Flash PBX Compatibility
Call Forwarding Forced Trunk Disconnect Pulse to Tone Conversion
Call Forwarding with Follow Me Group Call Pickup Ringdown Extension
Call Forwarding/DND Override Hold Save Number Dialed
Call Waiting/Camp On with Split Intercom Selectable Display Messages
Callback Handsfree Answerback/Forced
Intercom Ringing
Toll Restriction
Central Office Calls, Answering Last Number Redial Transfer
Central Office Calls, Placing Line Preference Trunk Queuing and Camp On
Conference Meet Me Conference Voice Mail
Department Calling Meet Me Paging Voice Over
Meet Me Paging Transfer Warning Tone for Long
Conversation
To Next Page
Loading...
