Program 21 : Outgoing Call Setup
21-06 : Toll Restriction Table Data Setup
Aspila EX Software Manual Programming 665
21-06 : Toll Restrictio n Table Data Setup
Description
Use Program 21-06 : Toll Restriction Table Data Setup to set the system’s Toll Restriction data.
Dial 1-9, 0, *, # can be entered in each table.
Input Data
Level:
Aspila EX
IN •Available.
Item
No.
Item Table Input Data Default Description
01 International call
restriction table
1-10 Dial
(Up to 4 digits)
Table 1-10 =
No Setting
This option lets you program the Restrict
Table for international calls. The system
has 10 International Call Restrict Tables.
Each entry can be up to four digits long.
02 International call
permit code table
1-20 Dial
(Up to 6 digits)
No Setting This option lets you program the Permit
Table for international calls. The system
has 20 International Call Permit Table.
Each entry can be up to six digits long,
using.
03 Maximum num-
ber digits table
assignment
1-4 4-30 Tables 1 - 4
= 30
This option selects the maximum number
of digits allowed in outgoing calls for each
table.
04 Common permit
code table
1-10 Dial
(Up to 4 digits)
Table 1 = 911
Table 2 = 1800
Table 3 = 1888
Tables 4 - 10 =
No Setting
This option lets you program the Common
Permit Code Table. This table contains up
to 10 codes you commonly allow users to
dial.
05 Common
restriction table
1-10 Dial
(Up to 12 digits)
Table 1 = 900
Table 2 = 1900
Table 3 = 976
Tables 4 - 10
= No Setting
This option lets you program the Common
Restrict Code Table. This table contains up
to 10 codes you commonly prevent users
from dialing.
06 Permit code table 1-4
(table)
1-60
(Entry)
Dial
(Up to 12 digits)
Table 1 - 4 =
No Setting
This option lets you program the Permit
Code Tables. If the system has Toll
Restriction enabled, users can dial num-
bers only if permitted by these tables and
the Common Permit Table (21-06-04).
There are four Permit Code Tables, with
up to 200 entries in each table. The system
permits calls exactly as you enter the code.
To Next Page
Loading...
