Program 21 : Outgoing Call Setup
21-06 : Toll Restriction Table Data Setup
666 Programming Aspila EX Software Manual
Conditions
None
Feature Cross Reference
• Toll Restriction
07 Restriction table 1-4
(table)
1-60
(Entry)
Dial
(Up to 12 digits)
Table 1 - 4 =
No Setting
This option lets you program the Restrict
Code Tables. If the system has Toll
Restriction enabled, users cannot dial num-
bers listed in these tables. There are four
Restrict Code Tables, with up to 200
entries in each table. The system restricts
calls exactly as you enter the code.
08 PBX Access
Code
1-4 Dial
(Up to 2 digits)
Table 1 - 4 =
No Setting
Use this option to enter the PBX Access
Code. When the system is behind a PBX,
this is the code users dial to access a PBX
trunk. Toll Restriction begins after the
PBX access code. For PBX trunks (Pro-
gram 14-04) the system only Toll Restricts
calls that contain the access code. Always
program this option when the system is
behind a PBX, even if you don’t want to
use Toll Restriction. PBX Access Codes
can be up to 2 digits, using 0-9, #, * and
LINE KEY 1 (don’t care). When using
Account Codes, do not use an asterisk
within a PBX access code. Otherwise, after
the *, the trunk would stop sending digits
to the central office. Entries 1-4 corre-
spond to the 4 PBX Access Codes. Each
code can have up to 2 digits.
09 Specific dial out-
going code
1-20 Dial
(Up to 8 digits)
No Setting
10 Outgoing Call
Code Setup
1-20 Dial
(Up to 4 digits)
No Setting
Item
No.
Item Table Input Data Default Description
To Next Page
Loading...
