NEC ASPILA EX - DTMF Tone Receiver Setup

Program 80 : Basic Hardware Setup for System
80-03 : DTMF Tone Receiver Setup
940 Programming Aspila EX Software Manual
80-03 : DTMF Tone Receiver Setup
Description
Use Program 80-03 : DTMF Tone Receiver Setup to define the various levels and timers for the
DTMF Tone Receiver
Input Data
Level:
Aspila EX
MF •Available.
DTMF Tone Receiver Type No 1- DTMF Receiver for Extension
2- DTMF Receive for Trunk
3- - Reserve -
4- - Reserve -
5- - Reserve -
Item No. Item Input Data
01 Detect Level 0- 0dBm…-30dBm
1- -15dBm…-45dBm
2- -30dBm…-55dBm
02 Start delay time 0-255 (0.25ms-64ms)
03 Min. detect level 0-15
detect level 0 : –15dBm(0) to –30dBm(15)
detect level 1 : –30dBm(0) to –45dBm(15)
detect level 2 : –40dBm(0) to –55dBm(15)
04 Max. detect level 0-15
detect level 0 : 0dBm(0) to –15dBm(15)
detect level 1 : –15dBm(0) to –30dBm(15)
detect level 2 : –30dBm(0) to –45dBm(15)
05 Forward twist level 0-9 (1dB…10dB)
06 Backward twist level 0-9 (1dB…10dB)
07 ON detect time 1-255 (15+15ms…3825ms)
08 OFF detect time 1-255 (15+15ms…3825ms)